|
摘 要 圆筒混合机是烧结厂主要设备之一。一次混合机主要作用是将物料混匀及湿润，二次混合机主要是对物料进行制粒，使物料满足成分均匀、水分适中、透气良好的要求。混合料的进料由皮带机和漏斗两种形式，将料送入圆筒混合机的进料端，通过筒体的旋转，物料在筒体内呈螺旋状运动，在运动的过程中使混合料形成“滚落”状，从而完成物料的混合、湿润、制粒、混匀，通过圆筒混合机排料端的溜槽排到皮带输送机上。 内容来自www.paper51.com 阐述了混和、制粒时物料的运动过程，对圆筒混合机内物料运动的几种状态进行分析。描述了影响圆筒混合机混匀、制粒的因素。分析了圆筒混合机筒体各部分的力学性能，提供了相应的受力的计算方法。然后阐述了圆筒混合机传动装置的受力分析和计算方法，主要是对轴的安全性能的校核，保证传动的可靠性。 copyright paper51.com 关键词 圆筒混合机；传动；受力分析；校核 copyright paper51.com Abstract paper51.com Drumblender is one of the most important equipments in modern iron and steel corporation. The primary role of the first mixeris mixing materials and humid. The Mixer of second major is used to proceed granulation.Uniform material to meet constituents, moderate water, good ventilationrequirements. Mixture of feed material from the belt and a funnel in two forms,Will be expected into the cylinder-feed mixer Through the revolving cylinderMaterials in the cylinder show a spiral movement movement in the process ofmixture formation is tumble accusation .Thus completing the mixed materials、 humid、 granulation and blending,Through mixing drum nesting end of the chute into the conveyor belt. 内容来自论文无忧网 www.paper51.com Themixing and rolling process of material is explored. Several characteristics ofmaterial motion in drum blender are carefully analysis. Influence factors on materialmixing and balling is described. Analysis of the mixing drum cylinder parts ofthe mechanical properties. To provide the corresponding force method ofcalculation. Then the mixing of the Transmission stress analysis and calculationmethod are explored the main to the axis is checking at the safety performance,Ensure the reliability of transmission. paper51.com Keywords Drum blender;transmission; stress analysis; check 内容来自论文无忧网 www.paper51.com 目录 paper51.com 摘要…………………………………………...……………………I paper51.com Abstract.............................................................................................II http://www.paper51.com 第一章 绪论...................................................................................1 内容来自www.paper51.com
1.1 引言 ....................................................................................1 内容来自论文无忧网 www.paper51.com 1.2 圆筒混合机的发展.......................................................................1 http://www.paper51.com 1.2.1圆筒混合机概述........................................................................3 paper51.com 1.2.2 圆筒混合机的工作原理.................................................................3 copyright paper51.com 1.2.3 一次混合机..................................................................................3 paper51.com
1.3 圆筒混合机的结构.......................................................................4 内容来自www.paper51.com 1.3.1 入料装置.....................................................................................4 http://www.paper51.com 1.3.2 筒体部分.....................................................................................4 内容来自论文无忧网 www.paper51.com 1.3.3 传动装置.....................................................................................5 copyright paper51.com 1.3.4 支撑装置.....................................................................................5 内容来自www.paper51.com
1.3.5 给料装置.....................................................................................5 内容来自www.paper51.com
1.4 圆筒混合机的工艺布置...............................................................5 内容来自论文无忧网 www.paper51.com 1.4.1支撑形式.....................................................................................6 copyright paper51.com 1.4.2传动形式.....................................................................................6 内容来自www.paper51.com 1.5 影响物料混合及造球的因素.......................................................6 内容来自www.paper51.com
1.5.1原料性质的影响...........................................................................6 paper51.com
1.5.2加水润湿方法..............................................................................6 内容来自www.paper51.com 1.5.3混合、制粒效果..........................................................................7 copyright paper51.com
1.5.4混合制粒时间..............................................................................7 copyright paper51.com
1.5.5混合机的安装倾角及充填率.........................................................7 内容来自论文无忧网 www.paper51.com 1.5.6添加物........................................................................................8 paper51.com 1.6 作用及意义...................................................................................8 paper51.com 第二章 圆筒混合机电机功率计算..............................................9 内容来自www.paper51.com 2.1混合机传动总功率的分析...........................................................9 内容来自论文无忧网 www.paper51.com 2.2 圆筒混合机内物料运动过程分析..............................................10 内容来自www.paper51.com
2.2.1物料转动所消耗功率的计算.........................................................10 copyright paper51.com 2.2.2一次混合机的最佳参数选择.........................................................12 http://www.paper51.com 2.2.3二次混合机的最佳参数选择.........................................................12 paper51.com 2.3 计算物料重心上移所消耗的功率..............................................13 http://www.paper51.com 2.3.1计算物料滚动时内摩擦所消耗的功率...........................................15 内容来自www.paper51.com
2.3.2计算转动物料所消耗的功率........................................................15 http://www.paper51.com
2.4 计算克服支承系统的摩擦所消耗的功率..................................15 copyright paper51.com
2.4.1计算托轮上所消耗的功率............................................................16 http://www.paper51.com 2.4.2计算挡轮上所消耗的功率............................................................17 内容来自www.paper51.com 2.4.3计算支承系统所消耗的总功率.....................................................17 内容来自www.paper51.com 2.5 计算总功率..................................................................................17 paper51.com 2.5.1圆筒混合机的电机功率计算.........................................................18 http://www.paper51.com 2.6本章小结......................................................................................19 内容来自论文无忧网 www.paper51.com 第三章 传动装置的总体设计...........................................................21 paper51.com 3.1分析传动装置的工作情况..........................................................21 http://www.paper51.com 3.1.1传动装置示意图..........................................................................21 paper51.com 3.1.2传动形式....................................................................................21 paper51.com 3.2根据传动装置的组成和特点确定传动方案..............................21 内容来自www.paper51.com 3.2.1圆柱齿轮减速器传动布置形式.......................................................22 内容来自论文无忧网 www.paper51.com 3.3初步确定减速器结构和零部件类型..........................................23 内容来自www.paper51.com 3.3.1确定传动装置的总传动比和分配各级传动比................................23 内容来自论文无忧网 www.paper51.com 3.3.2计算传动装置的运动和动力参数..................................................24 内容来自www.paper51.com 3.3.3减速器的选择.............................................................................24 paper51.com 3.3.4减速器的校核.............................................................................25 paper51.com
3.3.5圆柱齿轮减速器箱体设计注意事项..............................................26 内容来自论文无忧网 www.paper51.com
3.4 联轴器的选择.............................................................................26 内容来自www.paper51.com 3.4.1联轴器的附加力矩的计算............................................................26 paper51.com
3.4.2类型选择的条件..........................................................................27 http://www.paper51.com
3.4.3与电机轴相连的联轴器型号选择..................................................27 内容来自论文无忧网 www.paper51.com 3.4.4与减速器输出轴相连的联轴器型号选择........................................27 内容来自www.paper51.com 3.5 传动齿轮和齿圈的设计.............................................................28 paper51.com 3.5.1 选定齿轮类型、精度等级、材料及齿数......................................28 内容来自论文无忧网 www.paper51.com 3.5.2 按齿面接触强度设计..................................................................28 http://www.paper51.com 3.5.3 按齿根弯曲强度设计..................................................................30 paper51.com 3.5.4 几何尺寸计算............................................................................32 paper51.com 3.6 轴的结构设计.............................................................................32 内容来自论文无忧网 www.paper51.com 3.6.1 轴结构设计的一般原则.............................................................32 内容来自www.paper51.com
3.6.2 初步确定轴的形状及外形尺寸...................................................33 paper51.com
3.6.3 初步选择滚动轴承....................................................................34 内容来自www.paper51.com 3.6.4 确定轴上圆角和倒角尺寸..........................................................35 内容来自论文无忧网 www.paper51.com 3.6.5 求轴上的载荷...........................................................................35 copyright paper51.com 3.6.6 按弯扭合成应力校核轴的强度...................................................39 paper51.com 3.6.7 精确校核轴的疲劳强度..............................................................39 内容来自www.paper51.com 3.7 本章小结....................................................................................42 内容来自www.paper51.com 第四章 设备的使用和维护..............................................................43 内容来自www.paper51.com 4.1设备的使用................................................................................43 http://www.paper51.com 4.2设备的维护................................................................................43 内容来自www.paper51.com
第五章 结束语.................................................................................44 http://www.paper51.com 参考文献..............................................................................................45 http://www.paper51.com |